Epson EPI-4000 User Manual Page 144

  • Download
  • Add to my manuals
  • Print
  • Page
    / 292
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 143
Replacing the Ink Cartridge
When the display reads IL, the ink low message, there is enough ink
left in the cartridge to print only about 20 letter size pages. When the
cartridge is completely out of ink, the display reads 1E, the ink
empty message, and the printer goes off line. Then you cannot set
the printer back on line until you replace the ink cartridge.
When the ink low message first appears, make sure you have a new
ink cartridge and be ready to replace the old one when it runs out.
Always use the Epson S020003 ink cartridge in the EPI-4000. It is the
only ink cartridge the EPI-4000 can use. A-new ink cartridge
contains enough ink to print 1000 average letter-size or A4 pages.
(Pages with dense text or graphics use more ink.)
WARNING: Please take the following precautions when
you handle ink cartridges for the EPI-4000:
l Avoid allowing the ink to contact skin or eyes. If ink
gets into your eyes, flush them immediately with water.
After you handle an ink cartridge, thoroughly wash any
traces of ink from your skin with soap and water.
l Do not take apart ink cartridges.
l Keep ink cartridges out of reach of children.
Follow these steps to replace the ink cartridge:
1.
Make sure the printer is off line.
WARNING; Never remove or install an ink cartridge when
the printer. Before you remove or install an ink
cartridge, always set the printer off line so that the print
head is capped at the left side of the printer.
Maintenance and Transportation
5-7
Page view 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 291 292

Comments to this Manuals

No comments