Epson Stylus Color IIs User's Guide download pdf (Page 76)

Printing stops and the

Error

Condensed

, and

Pause

lights

are flashing.

There is a carriage error. Turn off the printer; then, after a few

seconds, turn it on and try printing again. If the same lights

flash again, contact your dealer or an authorized EPSON

servicer.

Printing stops and all lights are flashing (except the

Power

light).

There is a fatal error; contact your dealer or an authorized

EPSON servicer.

The

Error

and

Pause

lights flash.

You may have pressed the Alt button when the ink cartridge or

the print head unit was not installed or not installed correctly.

Check the installation steps in Chapter 3 to reinstall the ink

cartridge or print head unit.

The printer sounds like it is printing, but nothing prints.

The print head may need cleaning. See Chapter 3 for

instructions.

The ink cartridge may be too old. A cartridge is too old if it has

been used longer than six months or beyond the date on its

packaging. First clean the print head as described earlier in this

chapter. If this does not solve the problem, replace the ink

cartridge.

The cable between the printer and computer may not meet the

specifications for the printer or computer. See “System

Requirements” in the Setup Guide for cable guidelines.

Turn off the printer and perform a self test as described in

Chapter 1 of the Setup Guide. If the self test does not print, the

problem is with the printer. If the self test prints correctly, the

problem is probably caused by your software.

Hudson User’s Guide

A5 size Chapter 4

10-28-95 DR, pass 2-Rev1

4-8 Troubleshooting

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 113 114

Comments to this Manuals

No comments

Epson Stylus Color IIs User's Guide Page 76

Comments to this Manuals

Related products and manuals for Print & Scan Epson Stylus Color IIs