ATH2 Owner’s Manual SAFETY! SAFETY! 1) Read and understand instructions and heed warnings before beginning installation. 2) Mount r
ATH2 Owner’s Manual 7 Lens Sled Operation The status LED indicator behind the plastic window on the ATH2 will flash three times when the unit is po
ATH2 Owner’s Manual 8 Rear Panel –Triggers To use the automatic lens trigger, with a projector or scaler equipped with an external 12V lens trig
ATH2 Owner’s Manual 9 Cleaning & maintenance The Panamorph system is completely maintenance free. It will deliver many years of trouble free
ATH2 Owner’s Manual 10 specifications Electrical Characteristics Model ATH2 motorized sled Power supply 100-240VAC, 50-60 cycles P
ATH2 Owner’s Manual Dimensions Center of lens motor side Center of lens pulley side ©Panamorph Inc January 2009 – All rights reserved Page 1
ATH2 Owner’s Manual ©Panamorph Inc January 2009 – All rights reserved Page 15
ATH2 Owner’s Manual ©Panamorph Inc January 2009 – All rights reserved Page 16 Warranty Panamorph Inc, warrants this product to be free of
ATH2 Owner’s Manual January 2009 Edition – Printed January 2009 ©Panamorph Inc. All rights reserved ©Panamorph Inc January 2009 – Al
ATH2 Owner’s Manual . 1 Introduction Congratulations, and thank you for purchasing a quality Panamorph product. Your ATH2 lens motor/sled is outf
ATH2 Owner’s Manual 2 Motorized Lens Sled Parts During installation, this manual will refer to the motor side, or the pulley side of the mecha
ATH2 Owner’s Manual 3 Plan your installation The lens assembly may be mounted in one of two ways: 1) To the ceiling or projector mount above the
ATH2 Owner’s Manual 4 Mount Sled to Projector Plate When using the Panamorph AKX or AKXPro system follow directions supplied with the mounting pl
ATH2 Owner’s Manual 5 Attach Lens Bracket 1)Attach lens bracket to adapter plate Remove the bracket mounting screws and hex key from the parts
ATH2 Owner’s Manual 6 Setup 1) Power up the sled and set LENS IN position Bright lights, particularly direct sunlight shining into the optical senso
ATH2 Owner’s Manual 3) Attach anamorphic lens to bracket Attach the UH480 lens to the bracket using the lens knobs supplied with the lens. Adjust the
Comments to this Manuals