Epson IR-320 User Manual download pdf (Page 11)

IR-320 Specifications

CPU Intel: Celeron

733 MHz (FCPGA) Secondary cache 128 KB built-in

Intel: Celeron

1.2 GHz (FCPGA2) Secondary cache 256 KB built-in

Power management IR-320 BIOS supports Advanced Configuration and Power Interface (ACPI).

ACPI controls power management function for the CPU, video, hard disk drive, and

so on.

DIMM sockets Two 168-pin DIMM sockets are provided on the main board.

3.3V SDRAM / maximum 512 MB

System ROM System BIOS and video BIOS are registered in 4 MB flash ROM on the main board.

Chipset Intel 810E2

Video controller Built-in Chipset, 1024 × 768 (16 M colors), 800 × 600 (16 M colors),

640 × 480 (16 M colors). Color available only when a CRT is connected.

Sound Can be output to the built-in speaker. External line input/output, microphone input

Speaker Built-in monaural speaker with volume control

Parallel 25-pin D-Sub female connector. Port can be defined as ECP or EPP.

Serial 9-pin D-sub male connector × 2. Six serial ports supported. 2 ports used for internal

printer/DM display (COM3) and touch panel (COM4). When either COM5 or COM6

is used, an unneeded device (such as Parallel, USB, or Sound) must be set to unused

by BIOS setup.

Ethernet 10BASE-T or 100BASE-TX Wake Up on LAN available

Keyboard/mouse 6-pin miniature-DIN female connector (PS/2 type). Use branch (Y cable) to connect

both keyboard and mouse.

Display 15-pin SD-Sub female connector. Analog RGB display can be connected.

The CRT and the LCD can be displayed at the same time. However, the CRT and

the LCD cannot display different screens with the multi-display function of

Windows



98 (Second Edition) / Windows



2000 Professional / Windows



Professional Edition. To use the multi-display function, install a video card in the PCI

slot and connect the monitor to the video card.

USB Type A 4-pin × 2. One USB at the rear side and one on the right side. The USB

interface supports Windows



98 (Second Edition) / Windows



2000 Professional /

Windows



XP Professional Edition.

Drawer (DK) 6-pin. When a printer is attached, a cash drawer can be connected to this

interface.

External TM power

supply

One port (24V) When the IM-320 is equipped with a dedicated TM printer, the

power connector for the external TM printer cannot be used.

PCI slot PCI slot × 2. 32-bit, half-size: 135 × 101 mm {5.3 × 4.0"} (L × W), H: Parts side:

12 mm {0.47"}, H: solder side 10 mm {0.39"} I/O expansion slots. +3.3V is available.

Floppy disk drive 3.5-inch floppy disk drive with a 720 KB or 1.44 MB storage capacity.

Hard disk drive A unit of 3.5"-type Hard Disk (maximum thickness: 25.4 mm {1"}) or 2 units of the 2.5"-

type Hard Disk (maximum thickness: 9.5 mm {0.37"}, for a unit: 12.7 mm {0.5"}

maximum) can be attached. IDE interface, Ultra DMA/33/66/100.

CD-ROM drive (option) E-IDE Interface. Can be set as boot drive. Cannot be installed when a Front

CompactFlash Adapter is installed.

CD-R/RW drive (option) E-IDE Interface. Can be set as boot drive. To write to the CD-R or CD-RW,

commercially available software is necessary. Cannot be installed when a Front

CompactFlash Adapter is installed.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 127 128

Comments to this Manuals

No comments

Epson IR-320 User Manual Page 11

Comments to this Manuals

Related products and manuals for Unknown Epson IR-320