Epson EB-4750W User's Guide download pdf (Page 129)

• Lamp timer failure

• Lamp out

• Internal temperature error

• High-speed cooling in progress

• Lamp replacement notification

• Low Air Flow (Low Air Flow)

• Low Air Flow Error (Filter Airflow Error)

• No-signal

No Signal is input to the projector. Check the connection status or check

that the power for the signal source is turned on.

• Auto Iris Error

• Power Err. (Ballast)

See the following to deal with problems or warnings.

s "Reading the Indicators" p.95

Management Using SNMP

By setting SNMP to On in the Configuration menu, notification messages

are sent to the specified computer when a problem or warning occurs. This

will enable the operator to be notified of problems with projectors even at

locations away from the projectors.

s Network - Others - SNMP p.89

• SNMP should be managed by a network administrator or someone

who is familiar with the network.

• To use the SNMP function to monitor the projector, you need to

install the SNMP manager program on your computer.

• Up to two destination IP addresses can be saved.

Displaying the Web Remote Screen

The Web Remote function allows you to perform projector remote control

operations with a Web browser.

Display the Web Control screen.

Click Web Remote.

The Web Remote screen is displayed.

Monitoring and Controlling

129

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 155 156

No comments

Epson EB-4750W User's Guide Page 129