Epson EB-4750W User's Guide download pdf (Page 22)

Top Menu Name Sub Menu/Items

Settings

Geometric Correction s p.40

Extended

Multi-Projection

- Multi-screen s p.50

* Except for custom settings of gamma

To set menu items that cannot be set while the test pattern is

being displayed or to fine-tune the projected image, project an

image from the connected device.

Press the [Esc] button to close the test pattern.

Adjusting the Position of the Projected Image

(Lens Shift)

The lens can be shifted to adjust the position of the projected image, for

example, when the projector cannot be installed directly in front of the

screen.

Release the lens shift dial lock.

Turn the vertical and horizontal lens shift dials on the projector to

adjust the position of the projected image.

Attention

When adjusting the image height with the vertical lens shift dial, adjust

by moving the image from the bottom to the top. If it is adjusted from

the top to the bottom, the image position may move down slightly

after adjusting.

• We recommend setting the focus, zoom, and lens shift at least

30 minutes after you start the projection, because images are

not stable right after turning on the projector.

• The image will be clearest when both the vertical and

horizontal lens shift are set in the center.

The ranges within which the image can be moved are shown below.

Installing the Projector

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 155 156

No comments

Epson EB-4750W User's Guide Page 22