Epson EMP-730 User Manual download pdf (Page 41)

100

If flickering, fuzziness or interference appear

in images that are input from the computer,

and this cannot be fixed using automatic setup,

you will need to adjust the sync

manually

using the following procedure.

Procedure

Press the [Menu] button on the

remote control, and then select

"Sync." from the "Video"

menu.

For details on this operation, refer to

"Using the Configuration Menus".

(p.56)

Press the [ ] and [ ] buttons

to set the sync value.

The sync value increases or decreases

each time a button is pressed.

After making the adjustment, press the [Menu] button to exit

the configuration menu.

Tip :

• If you adjust the sync without adjusting the tracking first, it will not be possible to get

the best adjustment results. Incorrect tracking adjustment may not be noticeable with

some types of picture. However, pictures with lots of lines and shading will tend to

show incorrect tracking adjustments more clearly, so be sure to check the tracking

adjustment first.

• It may also be possible to fix flickering and fuzziness by adjusting the brightness,

contrast

, sharpness and keystone correction settings.

Adjusting the Sync

Input Signal

Color Mode Select

Video

Audio

Setting

User's Logo

Advanced

About

Position

Adjust

Tracking

0000

Sync . 0

Brightness 0

Contrast

Sharpness 0

RGB

YUV( YCbCr YPbPr)

Auto Setup

Reset

Execute

: Select: Return

Reset All

ON OFF

[Normal ]

: Adjust