Epson ESC/POS TM-U220 User Manual download pdf (Page 16)

8 TM-U220 User’s Manual

English

11. Close the roll paper cover and tear off the roll paper with the

manual cutter, as shown in illustration O.

Note:

Do not open the roll paper cover during printing or paper feeding.

When using the printer, be sure to cut the roll paper with the manual cutter

after paper feeding is complete.

Replacing Roll Paper

1. Open the roll paper cover by using the tab, as shown in illustration H.

2. Types B and D: Remove the used roll paper core.

3. Type A only: Remove the take-up spool, and open the unit by

using the unit open lever, as shown in illustration I; then remove

the used roll paper core.

4. Insert new roll paper. See the section “Inserting Roll Paper”.

Troubleshooting

No lights on the control panel

❏ Check the power supply cable connections and the power outlet.

ERROR LED is flashing or lit

❏ The print head temperature may be too high or low. Wait until the

print head cools or warms and the printer resumes printing

automatically.

❏ Make sure that the roll paper cover is properly closed.

❏ Types A and B: The autocutter blade is not in the normal position

and the autocutter is locked up. If it is a simple lock-up, the error is

corrected automatically. If not, see the instructions below to return

the blade to the normal position manually.

❏ A paper jam has occurred. To remove the jammed paper, see the

instructions below.

❏ Be sure to check if the specified power source is used. PA-6xxx

and PB-6xxx cannot be used with this printer.

❏ Turn off the power, wait several seconds, and then turn it on

again. If the error remains, contact your supervisor or a qualified

service person.

1 2 ... 11 12 13 14 15 16 17 18

No comments

Epson ESC/POS TM-U220 User Manual Page 16