Epson C3900 Series User's Guide download pdf (Page 78)

Duplexing (Epson AcuLaser C3900DN only)

Select paper with high opacity for duplex (double-sided) printing. Opacity refers to how effectively

paper blocks out what is written on the opposite side of the page. If the paper has low opacity (high

translucency), then the printed data from one side of the page will show through to the other side.

Check your application for margin information. For best results, print a small quantity to make sure

the opacity is acceptable.

Note:

Only plain paper, special paper and thick stock, 60–210 g/m can be autoduplexed. See “Print Media” on

page 58.

Duplexing envelopes, letterhead, labels, postcards, glossy media or single side only papers is not

supported.

Check your application to determine how to set your margins for duplex (double-sided) printing.

The following Binding Position settings are available.

If “Short Edge” is selected, the pages will be laid out to flip at the top.

If “Long Edge” is selected, the pages will be laid out to flip at the side.

In addition, if “N-up” has been set to “Booklet”, autoduplex printing is performed.

The following Order settings are available when “Booklet” is selected.

If “Left Binding” is selected, the pages can be folded as a left-bound booklet.

AcuLaser C3900 Series User’s Guide

Media Handling 78

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 157 158

No comments

Epson C3900 Series User's Guide Page 78