Epson Stylus Photo 820 Specifications download pdf (Page 46)

Maintaining Your Printer

Transporting the Printer

If you move your printer some distance, you need to prepare it for transportation in

its original box or a similar one. Follow these steps:

Caution: To avoid damage, always leave the ink cartridges installed when

transporting the printer.

1. Turn on the printer, wait until the print head locks in the far right position, then

turn off the printer.

2. Unplug the power cord from the electrical outlet. Then disconnect the printer

cable from the printer.

3. Remove any paper from the printer and remove the paper support.

4. Open the printer cover. If you still have the

packing insert, slide it down into the area

beside the ink cartridge holder and tape it to

the printer case. If you don’t have the insert,

just tape the cartridge holder to the printer

case. Then close the printer cover.

5. Push in the output tray extension and close the tray.

6. Repack the printer and its attachments in the original box using the protective

materials that came with them.

Keep the printer level as you transport it.

After transporting the printer, remove the tape securing the print head and test your

printer. If you notice a decline in print quality, clean the print head (see page 33); if

output is misaligned, align the print head (see page 39).

Tape the ink cartridge

holder to the printer case

Caution: Be sure to remove the tape

and insert after installing the printer in its

new location.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 80 81

No comments

Epson Stylus Photo 820 Specifications Page 46