Epson 900N Troubleshooting Guide download pdf (Page 5)

EPSON Stylus COLOR 900N

3/99 EPSON Stylus COLOR 900N

- 5

Ethernet Card Specifications

Your EPSON Type B Ethernet Interface Card (C823632) lets

you connect the printer directly to your network.

Environmental

Temperature

Operation 41 to 95 °F (5 to 35 °C)

Storage

−

22 to 158 °F (

−

30 to 70 °C)

Humidity (without condensation)

Operation 20 to 80% RH

Storage 5 to 95% RH

Vibration

Operation 5 to 55 Hz at 0.4 G

Storage 5 to 55 Hz at 1 G

Shock 4 G

Network Software Supported

NetWare



3.1x, 4.1x, or 5

EtherTalk



(AppleTalk



)

TCP/IP protocol

1pr, ftp over TCP/IP protocol

NetBEUI over TCP/IP protocol

Network Connectors and Signal

Assignments

RJ-45, ISO/IEC 8802–3 12.6 MDI Specification

Regulatory Approvals

EMC FCC part 15B Class A

Reliability

MTBF 268,973 hr (power on, 100% duty)

Control Panel

The four lights on your printer’s control panel show the

printer’s status and alert you to problems like paper jams.

10BaseT/100BaseTX connectors

status sheet

button

link selection light

status lights

P is on The

P power light is on when the printer is on and ready to

print. It flashes when the printer is receiving a print job or

performing a maintenance operation, such as cleaning the

print head.

S flashes When the

S paper out light flashes, you have a paper jam.

Turn off the printer and gently pull out all paper. Make sure

none of the sheets are curled, creased, old, stuck together,

or too thin. Then reload the stack against the right edge

guide and slide the left edge guide over to the paper’s left

edge. Then turn the printer on.

S is on When the

S paper out light comes on, your paper is out or

incorrectly loaded. Make sure none of the sheets are curled,

creased, old, stuck together, or too thin. Then reload the

stack against the right edge guide and slide the left edge

guide over to the paper’s left edge. Press the

E load/eject

button to resume printing.

B or

flash

When an ink out light flashes, your ink supply is low. Make

sure you have a replacement cartridge.

B or

are on

When an ink out light comes on, you need to replace the ink

cartridge. See page 8 for instructions.

P and

flash,

and

B and

are on

When the

P power and

S paper out lights flash and the

B black and

A color ink out lights come on, jammed paper

may be blocking movement of the print head. Turn off the

printer, wait a few seconds, and turn it back on. If no paper

ejects, turn off the printer, remove the jammed paper, and

turn it on again. If the lights still flash or stay on, contact

your dealer or EPSON.

P S B A

flash

When all the lights flash, your printer may have an internal

error. Make sure you removed all the packing material as

described on the unpacking sheet in your printer box. Then

turn off the printer, wait a few seconds, and turn it on again.

If the lights still flash or stay on, contact your dealer or

EPSON.

P S B A

are off

When all the lights are off, the printer is not receiving

power. Try these solutions:

❏ Make sure the printer is turned on.

❏ Turn off the printer, plug in the power cord securely,

and turn on the printer again.

❏ Make sure the outlet is not controlled by a switch or

timer and is operable.

power button

load/eject button

cleaning button

paper out light

color ink

out light

black ink

out light

power

light

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Epson 900N Troubleshooting Guide Page 5

Comments to this Manuals

Related products and manuals for Print & Scan Epson 900N