Epson Stylus Color IIs Specifications download pdf (Page 47)

Check that the printer driver’s

Brightness

and

Contrast

settings (PC driver) or

Light/Dark

setting (Macintosh driver)

are appropriate for the image.

If you scanned the image, the different color interpretation

technologies used by your scanner, monitor, and printer can

never produce an exact color match with the original image.

However, check your scanner documentation for utilities you

can use to calibrate your scanner to your monitor and printer to

more closely match colors.

If you are printing from a DOS application using economy

mode, black text or graphics will appear gray on your printout;

turn off economy mode to achieve deeper blacks.

Printing starts too high or too low on the page, or the page

length or margins are not what you expect.

Make sure you selected the correct

Paper Size

option in the

printer driver; see your

Setup and Software Guide

for instructions.

Use your software program to adjust the margins, or change

the number of lines per page, or change the page length setting

to match the paper you are using.

Change the loading position of the paper using Default setting

mode as described in Chapter 2.

Problems with Printing

If you cannot get the printer to print, first check that paper is

loaded in the printer. Then check that the printer is plugged

into a working electrical outlet that is not controlled by a switch

or timer. Verify that the interface cable is securely connected to

the printer and computer. If all this is correct, see the following

specific problems.

4-6

Troubleshooting

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 84 85

No comments

Epson Stylus Color IIs Specifications Page 47