Epson WF-M1560 Quick Start Guide download pdf (Page 28)

28 Printing and Copying Problems

Cannot Scan Over the Network

■ Make sure your computer is connected to the same network as your printer.

■ If you cannot scan from the product’s control panel, make sure you restarted your

computer after installing the product software. Make sure EPSON Event Manager is

not being blocked by your firewall or security software.

■ If you are scanning a large document at high resolution, a communication error may

occur. If the scan did not complete, lower the resolution.

■ Check the Connection setting and test the connection using EPSON Scan Settings.

■ If network communication was interrupted while starting EPSON Scan, exit EPSON

Scan, and restart it after a few seconds. If EPSON Scan cannot restart, turn the

product off and on, and then try again. Check the

Timeout Setting in EPSON Scan

Settings.

Print a Network Status Sheet

1. Press x Menu.

2. Press u or d to select

Wi-Fi/Network Settings, then press OK.

3. Press u or d to select

Print Wi-Fi/Network Status Sheet, then press the x Start

button to print a network status sheet.

Printing and Copying Problems

■ Make sure the size of paper you loaded matches the paper size selected on the control

panel or in your printer software.

■ Make sure your original is placed properly (see page 6). If your original is on the

scanner glass and the edges of your copy are cropped, move your original away from

the edges slightly. Also, place the document flat against the scanner glass.

■ Printing stops when the ink cartridge is expended. You must replace it to continue

printing.

■ Make sure your paper is loaded short edge first and is positioned against the right side

with the edge guide against its left side. Don’t load paper above the arrow mark on the

edge guide.

raphael-fvg_qgR1.book Page 28 Thursday, February 7, 2013 12:17 PM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 83 84

No comments

Epson WF-M1560 Quick Start Guide Page 28