Epson 7500 User Manual download pdf (Page 32)

If you install one type of display adapter card and then change

the adapter (from VGA to CGA or vice-versa), you also may

need to set jumper J5. If you have two types of cards, set the

jumper to match the adapter controlling your primary display.

See Chapter 2 in the

User’s

Guide for instructions on changing

jumper settings and the manual that came with your monitor

for additional information.

Setting the Self Test Error Level

When you start your system, it performs a self test. The

Halt

On option determines the point at which the system will

stop if it finds an error during the self test.

If your computer is running without a keyboard or diskette

drive or it must always start, you can choose one of the options

in the following table to ensure the computer will boot.

Self test error levels

Select

All Errors*

You want your system to stop booting if it encounters

any errors during the self test

No Errors You don’t want your system to stop booting, even if it

encounters errors during the self test

All But

You want your system to stop booting if it encounters

Keyboard

any error except a keyboard error during self test

All But Diskette

You want your system to stop booting if it encounters

any error except a diskette drive error during self test

All But Diskette/

You want your system to stop booting if it encounters

Keyboard any error except either a diskette drive error or a

keyboard error during self test

l Default setting

2-6

Running the SETUP Program

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 57 58

No comments

Epson 7500 User Manual Page 32