Replacing option cards
To replace any option cards you may have removed, reinstall
the card in the appropriate slot and secure it to the back of the
computer with the retaining screw.
Replacing the Cover
After you install (or remove) an option card or change an
internal setting, follow these steps to replace the computer’s
cover:
1.
Facing the front of the computer, position the cover on the
computer as shown below. Pull the cover’s sides outward
slightly.
2.
Lower the cover and slide it toward the back of the
computer. The diskette drive fits through the opening in
the front panel and the power switch fits into the notch on
the back right side of the cover. Push firmly to slide the
cover over the grounding tabs.
Installing Options 5-15
Comments to this Manuals