Epson Ensemble HD 1080 Projector User's Guide download pdf (Page 29)

Listening to a Tape Deck

Make sure your tape deck (or other audio source) is connected to the AUDIO 1 port on the back of the

AV controller, as described in “Connecting Audio Equipment” on page 36.

1 Select the

AUDIO option on the remote control, then select AUD1. This switches the audio input to your

tape deck.

2 Use the controls on your tape deck to begin playing music.

Listening to AM/FM Radio

You can use the AV controller to receive AM or FM radio broadcasts. First make sure an antenna is connected,

as described in the Installation Guide.

Tuning to the Desired Station

1 Select the RADIO option on the remote control to activate the radio:

Note

To use the radio, it is not necessary to lower the screen or turn on the projector.

2 Select the BAND option on the remote control to switch between AM and FM. The display on the

AV controller shows the current station:

3 Select

TUNE+ or TUNE– to change the frequency:

• Press the button momentarily and then release it to change the frequency manually.

• Or press and hold the button to find the next available station automatically. The tuner searches until

a station of sufficient strength has been found, and the word “TUNED” appears on the display. Weak

stations are skipped during the auto-tuning process.

MAIN

DVD

CABLE

SAT

RADIO

1 OF 2

Select RADIO

FrequencyBand

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 131 132

No comments

Epson Ensemble HD 1080 Projector User's Guide Page 29