Epson Ensemble HD 1080 Projector User's Guide download pdf (Page 80)

3 Select one of the following:

•

LEARN to erase commands that were learned from another remote control

•

MACRO to erase macros you created

4 At the next screen, select one of the following:

•

ALL to erase all learned commands or macros. When you select this option, you see SURE? displayed

on the screen. Select

SURE? to erase the settings, or select EXIT to cancel.

•

DEVIC to erase all commands or macros for a specific device. When you select this option, you see a

list of devices (DVD, CABLE, SAT, etc.). Select the device whose settings you want to erase. You see

ERASED! displayed at the bottom of the screen.

Caution

Be careful to select the correct device. If you select the wrong one, you won’t have the option to cancel.

• KEY to erase a single command or macro. When you select this option, you see a list of devices (DVD,

CABLE, SAT, etc.). Select the device that has the command or macro in its menu that you want to

erase, then select the command or macro. You see ERASED! displayed at the bottom of the screen.

Caution

Be careful to select the correct command or macro. If you select the wrong one, you won’t have the option to

cancel.

5 Press the MAIN button several times to return to normal operation.

Using Remote Control Punch-Through

The Ensemble HD remote control is pre-programmed to let you operate various devices, each from its own

menu. For example, if you’ve connected a high-definition DVD player, you can operate it from the HD menu;

or you can operate a satellite receiver from the SAT menu. However, you may want to be able to operate your

high-definition DVD player from the MAIN menu so you can also access the Ensemble HD setup menu, and

adjust the picture or sound at the same time, for example. To do this, you create a “punch through.” This lets

you use the remote control to operate certain functions of one device, while you have the menu screen open for

another device. (You can punch commands through any menu, not just the MAIN menu.)

Note

The volume control is automatically punched through to your home theater system from every device.

Follow these steps to set up a punch-through:

1 Enter Setup mode by pressing and holding both the

MAIN and ENT buttons for three seconds. The top of

the screen displays SETUP.

Note

You have 30 seconds to complete each step. After that, the remote control returns to normal operation.

2 Select the PUNCH option. (You may have to press PAGE or to see it.)

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 131 132

No comments

Epson Ensemble HD 1080 Projector User's Guide Page 80