Epson TM-T70 Instruction Manual download pdf (Page 33)

Rev. A Setup 2-11

TM-T70 Technical Reference Guide

2.3.3.1 USB Interface Connection Diagram

Figure 2-17 USB connection

2.3.3.2 Connecting the USB interface cable

1. Attach the locking wire saddle at the location shown in the figure below.

2. Put the USB cable through the locking wire saddle as shown in the figure below.

Note:

Putting the USB cable through the locking wire saddle, as shown in the figure below, prevents the

cable from coming unplugged.

Figure 2-18 Installing the locking wire saddle

3. Connect the USB cable from the host computer to the USB upstream connector.

Note:

The hub installed in a USB model connector panel is a bus-power-supply hub.(UB-U01III only). It is

important to note that bus-power-supply hubs (including other USB model TM printers) and bus-

power-supply functions with a current consumption of 100 mA or more cannot be connected directly

to the printer.

Example:

USB upstream connector

Locking wire saddle

USB cable

DM connector

UB-board

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 83 84

No comments

Epson TM-T70 Instruction Manual Page 33