Epson TM-T70 Instruction Manual download pdf (Page 36)

2-14 Setup Rev. A

2.3.5 Wireless LAN Interface Connection

For details on how to set up a wireless LAN interface, see the UB-R02 Technical Reference

Guide.

Note:

To use the Wireless LAN interface, the separate IP Address Setup Utility for the UB-E02 is required.

For details on the various setup methods, refer to “UB-E02 Technical Reference Guide.” You can

obtain the “IP Address Setup Utility for UB-E02” and the “UB-E02 Technical Reference Guide”

from one of the following URLs:

For customers from North America, go to the following web site:

http://pos.epson.com/

For customers from other countries, go to the following web site:

http://www.epson-pos.com/

Select the product name from the “Select any product” pull-down menu.

Other compatible Ethernet interface modules may be available for your printer. Contact your EPSON

dealer for information on the options available.

2.4 Connecting Power Supply Unit and Cash Drawer

Always use one of the following power supplies:

The EPSON PS-180 (the currently available power supply that can be used with the TM-T70).

Use the cash drawer handled by EPSON or your dealer.

WARNING:

Always use the EPSON PS-180 or an equivalent product as the power supply unit. Using a

nonstandard power supply can result in electric shock and even fire.

Should a fault ever occur in the EPSON PS-180, or equivalent product, immediately turn

off the power to the printer and remove the power supply cable from the wall socket.

2.4.1 Connecting the Power Supply Unit

1. Make sure the printer’s power supply is turned off and the power supply unit’s power cable

has been removed from the wall socket.

2. Check the specifications label on the power supply unit to confirm that the wall socket

power supply meets the rated voltage requirements.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 83 84

No comments

Epson TM-T70 Instruction Manual Page 36