Epson TM-T70 Instruction Manual download pdf (Page 58)

5-2 Product Specifications Rev. A

lps: lines per second

*1: During printing (at 24 V, 28°C {82.4°F}, Print density Normal). Note, however, the print speed automatically

changes with the voltage applied to the printer and with the head temperature conditions.

Note:

The print speed sometimes slows down, depending on the data transfer speed and other settings.

A slow baud rate is a probable cause of intermittent printing. We recommend using a faster baud rate.

5.3 Character Specifications (TM-T70)

Table 5-18 Print width/characters per line

Paper width (mm) Roll paper width (mm)

80 (standard)

Number of print dots 512

Print width (mm) 72 {2.84"}

Font A (12 × 24) number of columns 42

Font B (9 × 17) number of columns 56

Table 5-19 Print speed

Print control mode Unit Setting Print speed

(approx.)

High-speed mode (*1) mm/sec — 170mm/s {6.99"/s}

lps Line space setting: 4.23 mm {1/6"} 40.2 lps

Low-power mode mm/sec — 150mm/s {5.9"/s}

lps Line space setting: 4.23 mm {1/6"} 35.5lps

Printing ladder bar codes

and 2D code

mm/sec High-speed mode: Line space setting:

4.23 mm {1/6"}

100mm/s {3.9"/s}

mm/sec Low-speed mode: Line space setting:

4.23 mm {1/6"}

60mm/s {2.4"/s}

Bit image and Page mode mm/sec Low-speed mode: Line space setting:

4.23 mm {1/6"}

60mm/s {2.4"/s}

Table 5-20 Character specifications

Item Specifications

Character type Alphanumeric 95 character sets

International 48 types

Extended graphics 128 characters × 11 pages (including 1 blank page)

Character configuration See table titled

“Character configurations and dimensions,” below

(Default is font A.)

Character dimensions See “Character configurations and dimensions,” below.

(Spaces between characters not included.)

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 83 84

Comments to this Manuals

No comments

Epson TM-T70 Instruction Manual Page 58

Comments to this Manuals

Related products and manuals for POS/mobile printers Epson TM-T70