Epson Stylus Pro 7710 User's Guide download pdf (Page 101)

Cause What to do

The back of the printed paper is

soiled.

Set PAPER SIZE CHECK to ON in the Menu mode.

If the print image is bigger than the paper width and the PAPER SIZE CHECK is OFF,

the image is still printed extending beyond the print area, causing the inside of the

printer to become soiled. In order to keep the inside of the printer clean, set PAPER

SIZE CHECK to ON in the Menu mode.

See “PRINTER SETUP” on page 20

Is ink dry on the printed surface?

Depending on the printing density and paper type, ink may be hard to dry. Do not

stack the paper until the printed surface is dry.

Also, if you set the Drying Time per Page in the Paper Configuration of the printer

driver, you can stop the operation after printing (ejecting and cutting paper) and wait

until the ink is dry. For detailed information of the Paper Configuration window, see

the printer driver online help. While drying, the INK DRYING message appears on the

LCD panel. You can cancel drying by pressing the

button.

Too much ink is being released.

Is the Media Type setting correct?

Make sure that the paper settings of the printer match the paper that you are using.

The discharge of ink is controlled in accordance with the media type. If you print on

plain paper using the photo paper setting, too much ink will be discharged for the type

of paper.

Is the Color Density setting correct?

Lower the density of the ink in Paper Configuration dialog box in the printer driver. The

printer may be discharging too much ink for the paper. See the online help of the

printer driver for detailed information on the Paper Configuration dialog box.

Margins appear with borderless

printing.

Are the settings for the print data in the application correct?

Ensure that the paper settings in the application are correct as well as in the printer

driver.

See “Borderless Printing” on page 129

Are the paper settings correct?

Make sure that the paper settings of the printer match the paper that you are using.

See “Paper Information” on page 166

Have you changed the amount of enlargement?

Adjust the amount of enlargement for borderless printing. Margins may appear if you

set the amount of enlargement to Min.

See “Borderless Printing” on page 129

Is the paper stored correctly?

The paper may expand or contract if it is not stored correctly so that margins appear

even when borderless is set. Refer to the handling instructions for the paper for correct

storage.

Are you using paper that supports borderless printing?

Paper that is not intended for borderless printing may expand or contract during use

so that margins appear even when borderless is set. We recommend that you use the

recommended paper for borderless printing.

See “Paper Information” on page 166

Try to adjust the cutter.

When there are margins on the top and bottom of the roll paper while performing

borderless printing, try CUTTER ADJUSTMENT. It may reduce the margins.

See “MAINTENANCE ” on page 22

Epson Stylus Pro 7700/7710/9700/9710 User’s Guide

Problem Solver

101

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 186 187

Comments to this Manuals

No comments

Epson Stylus Pro 7710 User's Guide Page 101

Comments to this Manuals

Related products and manuals for Print & Scan Epson Stylus Pro 7710