Epson Stylus Pro 7710 User's Guide download pdf (Page 133)

Roll paper cut for borderless printing

When you use roll paper for borderless printing, the paper cut operation is different according to the Borderless

and Auto Cut settings of the printer driver.

No margins for left and right No margins for all directions

(single cut)

No margins for all directions

(double cut)

Printer driver

setting

Borderless: Enable Borderless: Enable Borderless: Enable

Auto Cut: Normal Cut Auto Cut: Single Cut Auto Cut: Double Cut

Printer

operations

Explanation Normal Cut is default setting. ❏ The top area may smear

because the top area of the

roll paper is cut while the

print operation is stopped.

❏ If the cut position is slightly

shifted, the image on the

continuous page remains on

the top or bottom area;

however, the printing time

gets shorter.

❏ If you select Single Cut and

print only a piece of paper,

the operation will be the

same as Double Cut. If you

print more than one paper

continuously, cut 1 mm along

the inside of each picture to

avoid creating a margin

between pictures.

❏ The top area may smear

because the top area of the

roll paper is cut while the

print operation is stopped.

❏ Because the inside of each

picture is cut in order to not

leave a white area in the top

and bottom areas, the

length of the paper

becomes 2 mm shorter.

❏ After cutting the bottom

area of the previous page,

the printer feeds the paper

and then cuts the top area

of the next page. Because of

that, about 60 to 127 mm of

scrap of paper is produced.

Take care to cut the paper

precisely.

Note:

When you want to cut prints manually, select Off.

Epson Stylus Pro 7700/7710/9700/9710 User’s Guide

Variety of Printings

133

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 186 187

Comments to this Manuals

No comments

Epson Stylus Pro 7710 User's Guide Page 133

Comments to this Manuals

Related products and manuals for Print & Scan Epson Stylus Pro 7710