Epson Stylus Pro 7710 User's Guide download pdf (Page 152)

F

Print a paper thickness test pattern.

1. Press the

/ button to select

THICKNESS PATTERN, and then press the

button.

2. Press the

button to print the paper

thickness test pattern.

Example of pattern:

G

Examine the printed pattern to determine

which set of lines are aligned (showing the

smallest gap), and select the Thickness Number

(from 1 to 15).

1. Press the

/ button to select the

number. In the case of the illustration above,

select 4.

2. Press the

button.

H

Set Paper Feed Adjustment, if necessary.

Set the paper feed amount (- 0.7 to 0.7%).

1. Press the / button to select PAPER

FEED ADJUST, and then press the

button.

2. Press the

/ button to set the paper feed

amount.

3. Press the

button.

4. Press the

button to go back to the

previous menu.

Note:

You can get a high-quality result if you print a

sample image using EPSON LFP Remote Panel

2 to set the value for Paper Feed Adjustment.

I

Set drying time, if necessary.

You can set the ink drying time for each print

head pass. The range is 0.0 to 10.0 seconds.

1. Press the

/ button to select DRYING

TIME, and then press the

button.

2. Press the

/ button to select the time in

seconds.

3. Press the

button.

4. Press the

button to go back to the

previous menu.

Note:

If the ink blurs on the paper, set a longer time

for ink drying.

J

Select the paper suction, if necessary.

1. Press the

/ button to select PAPER

SUCTION, and then press the

button.

2. Press the

/ button to select a suitable

setting for the paper.

3. Press the

button.

4. Press the

button to go back to the

previous menu.

K

Select the roll paper tension, if necessary.

1. Press the

/ button to select SET ROLL

PAPER TENSION, and then press the

button.

2. Press the

/ button to select a suitable

setting for the paper.

3. Press the

button.

4. Press the

button to go back to the

previous menu.

L

Select the remove skew setting, if necessary.

1. Press the

/ button to select REMOVE

SKEW, and then press the

button.

2. Press the

/ button to select a suitable

setting for the paper.

3. Press the

button.

4. Press the

button to go back to the

previous menu.

M

After registering the paper settings, press the

button to exit the Menu mode.

The custom paper setting is now completed.

Start printing to print on the custom paper you

just set.

Epson Stylus Pro 7700/7710/9700/9710 User’s Guide

Variety of Printings

152

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 186 187

Comments to this Manuals

No comments