Epson EMP-8300 User's Guide Page 102

  • Download
  • Add to my manuals
  • Print
  • Page
    / 136
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 101
102 Solving Problems
When the power and temperature lights are red, the projector has overheated,
which turns off the lamp automatically. Wait about 5 minutes for the projector to
cool, then unplug the power cord.
Verify that the air filter is not clogged. Clean or replace it as described on page 91.
Make sure the room temperature is not above 95 °F (35 °C) and there is plenty of
space around and under the projector for ventilation. Then plug the power cord
back in and press the
Power button.
If the projector continues to overheat, contact EPSON for help (see page 110).
Warning: Except as specifically explained in this User’s Guide, do not attempt to
service this product yourself.
When the power light is red and the temperature light is flashing red, there is a
problem with the fan or temperature sensor. Unplug the power cord and contact
EPSON for help (see page 110).
When the power light is green and the lamp light is flashing orange, the lamp is
near the end of its life. To ensure continued operation, you should replace it as
soon as possible (see page 94).
When the power light is red and the lamp light is flashing red, the lamp has burned
out. Replace it as described on page 94.
If these lights come on after replacing the lamp, make sure the lamp is fully
inserted and the lamp cover is attached.
If all three lights are red, the projector has an internal problem. Unplug the power
cord and contact EPSON for help (see page 110).
Status lights = on = flashing = off
Light Description and solution
Red
Red
Red
Red
Orange
Green
Red
Red
Red
Red
Red
Page view 101
1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 135 136

Comments to this Manuals

No comments