Epson EMP-8300 User's Guide download pdf (Page 108)

108 Solving Problems

The colors of the image are not right.

■ If you’ve connected equipment to the Computer 1, Computer 2,

or BNC port, make sure the correct

Input setting is selected in the

Setting menu (see page 70). Selecting the wrong setting can cause

images to appear green or purple.

■ Press the Color Mode button on the remote control; you can use

the preset options to adjust the projector’s brightness and color

for various lighting environments.

■ You can further adjust the color using various settings in the

projector’s menu system (see page 68).

■ Check your computer display settings to correct the color balance.

■ As the lamp nears the end of its life, the image may become darker

and the color start to deteriorate. Check the lamp timer to see

how long the lamp has been in use (see page 103), and replace the

lamp if necessary (see page 94).

There is no sound.

■ Make sure the A/V Mute button is not enabled.

■ Use the Volume button to raise the sound-level.

■ Make sure the sound cables are connected properly (see page 29).

For computer audio, the cable should be connected to the

computer’s headphone jack or audio out jack.

■ For computer audio, make sure the volume control on your

computer is not turned all the way down or muted. On a PC, you

may be able to check this by clicking the volume control in your

Windows System Tray (in the lower-right corner of the screen).

note

Because of the different

technologies used, your

projected image may not

exactly match the colors on

your laptop or computer

monitor.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 135 136

No comments

Epson EMP-8300 User's Guide Page 108