106 Using the Projector on a Network
2. Open your web browser and enter the IP address of the projector
you want to monitor in the browser’s address box. You see a
window like this:
3. Select options on the screen as necessary:
■ To turn the projector on or off, click the Power button.
■ To raise or lower the volume, click the Vol+ and Vol-
buttons.
■ To temporarily turn off the picture and sound, click the A/V
Mute
button (see page 67).
■ To select an input source, click it in the Sources List. To
scroll through the list, click the arrow bars at the top or
bottom of the list.
■ To pause or unpause an image, click the Freeze button in the
toolbar.
■ To adjust the contrast, click the Contrast button in the
toolbar.
■ To adjust the image brightness, click the Brightness button
in the toolbar.
■ To adjust the color saturation, click the Color button in the
toolbar.
note
If you’re not sure what the
IP address of the projector is,
turn the projector on and
select
Net. Info.-Wired
LAN
or Net.
Info.-Wireless LAN
from
the Network menu to
display the address. Do not
enter leading zeroes.
toolbar
note
The toolbar buttons are not
all visible at the same time.
To scroll through the toolbar
buttons, click the arrow
buttons on the left or right
side of the toolbar.
Comments to this Manuals