Epson PowerLite Pro G5450WUNL User's Guide Page 128

  • Download
  • Add to my manuals
  • Print
  • Page
    / 217
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 127
128 Fine-Tuning the Projector
Multi-screen
Use this option if you want to color-match two or more projectors
that are being used to display images near each other, or you are
using the multi-screen feature to project from one source (one
image) with multiple projectors (see the EasyMP Network
Projection Operation Guide). You can make image adjustments at
each of five adjustment levels. First choose an
Adjustment Level
and then adjust the settings for each level:
Brightness Correct to
adjust the brightness, and
Color Correct to adjust the balance
between red and green, or blue and yellow. See the next section
for more information about multi-screen color adjustment.
Language
Select a language to use for the projector menus and messages.
Multi-screen Color Adjustment
You can match the color of projected images when two or more
projectors are being used to display images near each other, or when
you use the multi-screen feature to project from one source (one
image) as described in the EasyMP Network Projection Operation
Guide. For each screen, you can set five levels of brightness and color
correction.
1. Before starting, you may want to assign a numeric ID to each
projector. This lets you use the remote control to select the
projector you want to adjust. See page 71 for instructions.
To match the display colors as closely as possible, make sure that
all the projectors are set to the same color mode before starting.
See page 114 for instructions.
2. Press the
Menu button, highlight the Extended menu, and press
Enter.
3. Select
Multi-screen and press Enter.
4. Start by setting the
Adjustment Level to 1 for two projectors.
Then use
Brightness Correct to match the darker projector to
the lighter one. Press
Enter to see the effects of your adjustments.
note
If you use two or more
projectors side-by-side,
exhaust from adjacent
projectors might cause
overheating. Leave at least
2 feet (60 centimeters) of
space between projectors.
Page view 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 216 217

Comments to this Manuals

No comments