Epson PowerLite Pro G5450WUNL User's Guide Page 139

  • Download
  • Add to my manuals
  • Print
  • Page
    / 217
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 138
Maintaining the Projector 139
It is time to replace the lamp when:
The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen when the
lamp comes on.
The Lamp light flashes orange.
To maintain projector brightness and image quality, replace the lamp
as soon as possible.
You may also need to replace the lamp if the
Lamp light flashes
red. See page 147.
Contact your dealer or call Epson at 800-GO-EPSON
(800-463-7766). Request part number V13H010L62
(G5450WUNL/G5550NL) or V13H010L63
(G5650WNL/G5750WUNL/G5950NL).
Follow these steps to replace the lamp:
1. Press the Ppower button on the back of the projector to turn it
off. After the projector beeps twice, unplug the power cord.
2. Let the projector cool for at least an hour (if it has been on). The
lamp is extremely hot immediately after use.
note
Epson recommends that you
clean the air filter whenever
you replace the lamp.
Lamp light
warning
Let the lamp cool fully
before replacing it.
In the unlikely event that
the lamp has broken, small
glass fragments may be
present and should be
removed carefully to avoid
injury. If the projector has
been installed on the ceiling,
you should stand to the side
of the lamp cover, not
underneath it.
If the lamp is used after the
replacement period has
passed, the possibility that
the lamp may break
increases. When a lamp
replacement message
appears, replace the lamp
with a new one as soon as
possible, even if it is still
working.
Page view 138
1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 216 217

Comments to this Manuals

No comments