Epson LX-300+ Troubleshooting Guide download pdf (Page 5)

EPSON LX-300+

5/00 EPSON LX-300+

Safety Approvals

120 V

Safety standards UL 1950

CSA C22.2 No. 950

EMI FCC part 15 subpart B class B

CSA C108.8 class B

230 V

Safety standards EN 60950

EMI EN 55022 (CISPR pub. 22) class B

AS/NZS 3548 class B

Acoustic noise Approx. 49 dB (A) (ISO 7779 pattern)

CE Marking

230 V

Low Voltage Directive 73/23/EEC EN 60950

EMC Directive 89/336/EEC EN 55022 Class B

EN 61000-3-2

EN 61000-3-3

EN 50082-1

IEC 60801-2

IEC 60801-3

IEC 60801-4

Control Panel Buttons and Lights

Tear Off lights

f f

When continuous paper is in the tear-off position;

otherwise the lights indicate the selected font.

Tear Off (Font) button

❏

When the tractor is installed in the push position, advances

continuous paper to the tear-off position.

❏

Feeds continuous paper backward from the tear-off position

to the top-of-form position.

LF/FF button

❏

Feeds paper line by line when pressed and released.

❏

When held down, ejects a single sheet or advances

continuous paper to the next top-of-form position.

Load/Eject button

❏

Loads or ejects a single sheet of paper.

❏

When the tractor is installed in the push position, loads

continuous paper from the standby position or feeds

continuous paper backward to the standby position.

Paper Out light

❏

On when no paper is loaded in the selected paper source or

paper is not loaded correctly.

❏

Flashes when paper has not been fully ejected or a paper jam

has occurred.

❏

In Micro Adjust mode, selects the font indicated by the

Tear Off

lights.

Pause button

Stops printing temporarily, and resumes printing when pressed

again. When pressed for 3 seconds, turns on Micro Adjust

mode.

Pause light

❏

On when the printer is paused.

❏

Flashes when the printer is in the Micro Adjust mode or

when the print head has overheated.

Micro Adjust mode

When you hold down the

Pause

button for 3 seconds, the

printer enters the Micro Adjust mode. In this mode, you can

press the

LF/FF

and

Load/Eject

buttons to adjust the

top-of-form or tear-off position.

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comments to this Manuals

No comments

Epson LX-300+ Troubleshooting Guide Page 5

Comments to this Manuals

Related products and manuals for Dot matrix printers Epson LX-300+