Epson Aculaser CX16NF User's Guide Page 132

  • Download
  • Add to my manuals
  • Print
  • Page
    / 213
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 131
Chapter 8
Maintenance
Maintaining the Machine
c
Caution:
Read all caution and warning labels carefully, making sure to follow any instructions contained in
them. These labels are located on the inside of the machine’s covers and the interior of the machine
body.
Handle the machine with care to preserve its life. Abuse handling may cause damage and void your
warranty. If dust and paper scraps remain on the inside or outside of the machine, machine
performance and print quality will suffer, so the machine should be cleaned periodically. Keep the
following guidelines in mind.
w
Warning:
Turn off the machine, unplug the power cord, and disconnect all interface cables before cleaning.
Do not spill water or detergent into the machine; otherwise the machine will be damaged and an
electric shock may occur.
c
Caution:
The fuser unit is hot. When the top door is opened, the fuser unit temperature drops gradually (one
hour wait time).
Be careful when cleaning the inside of the machine or removing media misfeeds, as the fuser unit
and other internal parts may be very hot.
Do not place anything on top of the machine.
Use a soft cloth to clean the machine.
Never spray cleaning solutions directly on the machine’s surface; the spray could penetrate
through the air vents of the machine and damage the internal circuits.
Avoid using abrasive or corrosive solutions or solutions that contain solvents (such as alcohol and
benzene) to clean the machine.
Always test any cleaning solution (such as mild detergent) on a small inconspicuous area of your
machine to check the solution’s performance.
Never use sharp or rough implements, such as wire or plastic cleaning pads.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Maintenance 132
Downloaded from ManualsPrinter.com Manuals
Page view 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 212 213

Comments to this Manuals

Vikirds 04 Jan 2024 | 12:57:50

urenrjrjkvnm

Serzjja 11 Jan 2024 | 21:02:11

coin