Epson Aculaser CX16NF User's Guide Page 181
- Page / 213
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Symptom Cause Solution
Printing takes too
much time.
The machine is set to a slow
printing mode (for example,
thick stock).
It takes more time to print with special media. When using
regular paper, make sure that the media type is set properly
in the driver.
The machine is set to power
saving mode.
It takes time for printing to start in power saving mode.
The job is very complex. Wait. No action needed.
If an error has been detected
during printing job transmission
in the Copy mode, it takes a while
to process the error and resume
the printing operation.
Wait. No action needed.
Blank pages are
printed.
One or more of the toner
cartridges are defective or
empty.
Check the toner cartridges. The image will not print correctly
or not at all, if the cartridges are empty.
The wrong media is being used. Check that the media type set in the driver matches the
media loaded in the machine.
Not all pages print. A different user accidentally
canceled the job.
Try printing the remaining pages.
The tray is empty. Check that the tray is loaded with media, in place, and
secure.
A document is printed with an
overlay file which has been
created by an unsuitable printer
driver.
Print the overlay file using a suitable printer driver.
Some parts of the
image are lost with
2in1 copying.
(AcuLaser CX16NF
only)
When printing envelopes, the
zoom ratio was specified, and
then 2in1 copying was set.
With 2in1 copying, the zoom ratio is automatically adjusted.
For 2in1 copying on media with a narrow printing area, such
as envelopes, set 2in1 copying, and then adjust the zoom
ratio, if necessary.
Machine resets or
turns off
frequently.
The power cord is not correctly
plugged into the outlet.
Turn off the machine, confirm that the power cord is
correctly plugged into the outlet, and then turn on the
machine.
A system error occurred. Contact Technical Support with the error information.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Troubleshooting 181
Downloaded from ManualsPrinter.com Manuals
- Printer / Copier / Scanner 1
- User’s Guide 1
- Copyright Notice 2
- Copyright Notice 3 3
- Legal Restrictions on Copying 4
- Copyright Notice 5 5
- Contents 6
- Contents 7 7
- Contents 8 8
- Contents 9 9
- Introduction 10
- Side View 11
- Side View with Options 11
- AcuLaser CX16 12
- Part Names 13
- Front View 14
- Introduction 15 15
- Introduction 16 16
- Rear View 17
- Printer Drivers 18
- Scanner Drivers 18
- Applications 19
- Documentation 19
- System Requirements 19
- Introduction 20 20
- Chapter 2 21
- About the Control Panel 21
- Display Indications 23
- ❏ Copy settings 24
- AcuLaser CX16NF 24
- ❏ Scan settings 26
- Print Screen 27
- PRINTER MODE Menu 28
- TONER REMAINING 29
- T/C CHANGE 29
- REPORT/STATUS Menu 30
- Configuration Menu Overview 32
- TRAY1 PAPER SETUP Menu 34
- COPY SETTING Menu 43
- Media Handling 49
- Plain Paper (Recycled Paper) 50
- Media Handling 51 51
- Thick Stock 52
- Envelope 53
- Media Handling 54 54
- Letterhead 55
- Postcard 55
- Media Handling 56 56
- Printable Area 57
- Envelopes 58
- Page Margins 58
- Loading Media 59
- Loading Paper 60
- Media Handling 61 61
- Media Handling 62 62
- Loading Plain Paper 63
- Media Handling 64 64
- Media Handling 65 65
- How do I autoduplex? 66
- Output Tray 67
- Media Storage 67
- Original Media 68
- Media Handling 69 69
- * Document 70
- 3. Gently close the cover 70
- Media Handling 71 71
- Using the Printer Driver 72
- Basic Tab 74
- Layout Tab 75
- Overlay Tab 75
- Watermark Tab 75
- Quality Tab 76
- Version Tab 76
- Using the Copier 77
- Basic Copy Operation 78
- Selecting the Document Type 79
- Specifying the Copy Density 79
- Specifying the Zoom Ratio 80
- Making Advanced Copies 81
- Setting a Copy Function 82
- ID Card Copying 83
- Repeat Copying 84
- Poster Copying 85
- Using the Copier 86 86
- Using the Copier 87 87
- Using the Copier 88 88
- Using the Scanner 89
- Windows TWAIN Driver Settings 90
- Using the Scanner 91 91
- Windows WIA Driver Settings 92
- Using the Scanner 93 93
- Using the Scanner 94 94
- Using the Scanner 95 95
- Using the Scanner 96 96
- Basic Scanning Operation 97
- Specifying the Data Location 98
- Using the Scanner 99 99
- Using the Scanner 100 100
- Using the Scanner 101 101
- Searching the Address Book 102
- Searching an LDAP Server 103
- Using the Scanner 104 104
- Using the Scanner 105 105
- Registering/Editing Addresses 106
- Using the Scanner 107 107
- Using the Scanner 108 108
- Using the Scanner 109 109
- Using the Scanner 110 110
- Using the Scanner 111 111
- Using the Scanner 112 112
- Using the Scanner 113 113
- Selecting the Data Format 114
- Setting the Scan Size 115
- Setting the Scan Color 115
- Specifying the Subject 116
- Replacing Consumables 117
- Replacing Consumables 118 118
- Replacing a Toner Cartridge 119
- Replacing Consumables 120 120
- Replacing Consumables 121 121
- Replacing Consumables 122 122
- Replacing Consumables 123 123
- Replacing Consumables 124 124
- Removing All Toner Cartridges 125
- Replacing Consumables 126 126
- Replacing Consumables 127 127
- Replacing Consumables 128 128
- Replacing Consumables 129 129
- Replacing Consumables 130 130
- Replacing Consumables 131 131
- Maintenance 132
- Maintenance 133 133
- Cleaning the Machine 134
- Media Rollers 135
- Maintenance 136 136
- Caution: 137
- Maintenance 138 138
- Maintenance 139 139
- 1. Open the ADF feed cover 140
- 3. Close the ADF feed cover 140
- Maintenance 141 141
- Maintenance 142 142
- Maintenance 143 143
- 1. Open the duplex door 144
- Print Head Window 145
- Maintenance 146 146
- Maintenance 147 147
- 6. Close the front cover 148
- Maintenance 149 149
- Maintenance 150 150
- Maintenance 152 152
- 11. Close the scanner unit 153
- 12. Press the Stop/Reset key 153
- Maintenance 154 154
- 16. Close the front cover 155
- Maintenance 156 156
- Troubleshooting 157
- Clearing Media Misfeeds 158
- Troubleshooting 159 159
- Troubleshooting 160 160
- Troubleshooting 161 161
- Troubleshooting 163 163
- Troubleshooting 164 164
- Troubleshooting 165 165
- Troubleshooting 166 166
- Troubleshooting 167 167
- Troubleshooting 168 168
- Troubleshooting 169 169
- 3. Reattach the dust cover 170
- 4. Press the Start key 170
- 3. Remove any misfed paper 171
- Troubleshooting 172 172
- 8. Reinsert Tray 2 173
- 4. Remove any misfed media 175
- 5. Close the ADF cover 175
- 6. Close the ADF feed cover 175
- 1. Open the duplex cover 176
- Troubleshooting 177 177
- Troubleshooting 178 178
- Troubleshooting 179 179
- Solving Other Problems 180
- Troubleshooting 181 181
- Troubleshooting 182 182
- Troubleshooting 183 183
- Troubleshooting 184 184
- Troubleshooting 185 185
- Troubleshooting 186 186
- Troubleshooting 187 187
- Troubleshooting 188 188
- Troubleshooting 189 189
- Status Messages 190
- Error Messages 191
- Troubleshooting 192 192
- Troubleshooting 193 193
- Troubleshooting 194 194
- Troubleshooting 195 195
- Troubleshooting 196 196
- Service Messages 197
- Chapter 10 198
- Kit Contents 199
- Installing Tray 2 199
- Installing Attachment 202
- Installing the Duplex option 203
- 4. Prepare the duplex option 204
- Appendix 207
- Appendix 208 208
- Standards and approvals 209
- Appendix 210 210
- Index 211 211
- Index 212 212
- Index 213 213
Comments to this Manuals
Related products and manuals for Laser/LED printers Epson Aculaser CX16NF
Laser/LED printers Epson 1010 Service Manual
(170 pages)
(170 pages)
Laser/LED printers Epson WF-B4023 User's Guide
(106 pages)
(106 pages)
Laser/LED printers Epson GQ-3500 User Manual
(165 pages)
(165 pages)
Laser/LED printers Epson EPL-N1200 User's Guide
(128 pages)
(128 pages)
Laser/LED printers Epson EPL-6000 Specifications
(219 pages)
(219 pages)
© 2020, manymanuals.com. All rights reserved. | 0.488 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
urenrjrjkvnm
coin