Epson 2000P User Manual download pdf (Page 48)

8. Lower the ink cartridge clamp and press it

down to lock it in place. (The color clamp is a

bit harder to close than the black clamp.)

9. If you need to replace the other ink cartridge,

repeat steps 4 through 8 before continuing

with step 10.

10. Press the yellow ink cartridge replacement

button and close the printer cover. The printer

moves the print head and begins charging the

ink delivery system.

The

Ppower light flashes, and the printer makes noise. Charging takes about

one minute. When it’s finished, the

Ppower light stops flashing and stays on.

Never turn off the printer while the

power light is flashing, unless the

printer hasn’t moved or made noise for more than 5 minutes.

Aligning the Print Head

If your printouts contain jagged characters or misaligned vertical lines, you may need

to align the print head. Your printer must be connected to a local port, not on a

network, to use the Print Head Alignment utility.

The utility is in two parts and takes approximately 15 to 20 minutes to complete.

Follow these steps:

1. Make sure the printer is turned on but not printing, and letter-size paper is

loaded.

Load paper that’s at least 8.27 inches (210 mm) wide to prevent ink from

spraying inside the printer and smudging your printouts.

For the best results, use a photo-quality paper, such as EPSON Archival

Matte Paper, to check the print head alignment. Don’t use plain,

recycled, or photocopier paper.

Pbasics.book Page 43 Wednesday, November 29, 2000 5:46 AM

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 76 77

No comments

Epson 2000P User Manual Page 48