Epson 2000P User Manual download pdf (Page 57)

52

Problems with Printing

Only the

Ppower light is on, but

nothing prints.

■ Make sure the interface cable is

connected securely and that the

cable meets the system

requirements on page 61 or

page 62.

■ Run a printer check as described

on page 49. If the check page

prints, make sure your printer and

application software are installed

correctly.

■ If you’re printing on a network,

you need to set up your printer for

network printing, as described in

your electronic Reference Guide.

The printer looks and sounds as

though it’s printing, but nothing

prints.

Make sure the print head nozzles are

not clogged. To clean the print head,

see page 37.

Printing is too slow.

Make sure your system meets the

requirements listed on page 61 or

page 62. If you’re printing a

high-resolution image, you need

more than the minimum

requirements listed.

You may also need to:

■ Clear space on your hard disk or

run a defragmentation utility.

■ Close open applications that

you’re not using.

■ Increase your system’s memory

(RAM).

■ Uninstall and reinstall your

printer software if you upgraded

to a newer version of Windows.

For the fastest printing, try the

following:

■ Choose Black ink if your

document is black text only.

■ Set the Quality/Speed slider to

Speed.

■ In the printer settings Advanced

dialog box, turn Super(x) off, and

turn High Speed on.

■ If you’re using the parallel port,

enable ECP/DMA mode on your

computer’s parallel port for

maximum print speeds. See your

computer documentation or the

manufacturer for instructions.

Your printer makes noise when

you turn it on or after it has been

sitting for a while.

Your printer is performing routine

maintenance.

Pbasics.book Page 52 Wednesday, November 29, 2000 5:46 AM

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 76 77

Comments to this Manuals

No comments