Epson Aculaser C9200N User's Guide download pdf (Page 199)

Transparencies are output blank from the MP tray

When there are errors while printing on transparencies, the Check Transparency error message

is displayed on the LCD panel.

Remove the transparencies from the MP tray. Open and close Cover F. Confirm the paper type and

size, and then load the correct type of transparencies.

Note:

❏ When using transparencies, load them in the MP tray and set the Paper Type setting to

Transparency in the printer driver.

❏ When the Paper Type setting in the printer driver is set to Transparency, do not load any other

type of paper except Epson Color Laser Transparencies.

Color Printing Problems

Cannot print in color

Cause What to do

Black is selected as the Color setting in the printer driver. Change this setting to Color.

The color setting in the application you are using is not

appropriate for color printing.

Make sure that the settings in your application are appropriate

for color printing.

The printout color differs when printed from different printers

Cause What to do

Printer driver default settings and color tables vary by

printer model.

Set the Gamma setting to 1.8 in the More Settings dialog box (for

Windows and Mac OS X 10.4 or below) or Color Settings button

(for Mac OS X 10.5) in the printer driver, then print again. If you

still do not get the printouts you expect, adjust the color using

the slide bar for each color. For details about the More Settings

dialog box, see the printer driver’s online help.

EPSON AcuLaser C9200 Series User's Guide

Troubleshooting 199

Downloaded from ManualsPrinter.com Manuals

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 270 271

No comments

Epson Aculaser C9200N User's Guide Page 199