Epson Aculaser C9200N User's Guide Page 211

  • Download
  • Add to my manuals
  • Print
  • Page
    / 271
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 210
The printer does not print correctly in the PostScript mode
Cause What to do
The printer’s emulation mode setting is incorrect. The printer is set to the Auto mode by default, so that it can
automatically determine the encoding used in the received print
job data and select the appropriate emulation mode. However,
there are situations where the printer cannot select the correct
emulation mode. In this case, it must be set manually to PS3.
Set the emulation mode through the SelecType Emulation Menu
on the printer. See “Emulation Menu” on page 85.
The printer’s emulation mode setting for the interface
that you are using is incorrect.
The emulation mode can be set individually for each interface
which receives print job data. Set the emulation mode for the
interface you are using to PS3.
Set the emulation mode through the SelecType Emulation Menu
on the printer. See “Emulation Menu” on page 85.
The printer does not print
Cause What to do
The Save as File check box is selected on the Output
Options sheet in the Print dialog box (for Mac OS X
10.3.9).
Clear the Save as File check box on the Output Options sheet in
the Print dialog box.
An incorrect printer driver is selected. Make sure that the PostScript printer driver that you are using to
print is selected.
The Emulation Menu in the printer’s Control Panel is set
to a mode other than Auto or PS3 for the interface that
you are using.
Change the mode setting to either Auto or PS3.
The printer driver or printer that you need to use does not appear in the Print
& Fax (for Mac OS X 10.5) or Printer Setup Utility (Mac OS X 10.4 or below)
Cause What to do
The printer name has been changed. Ask the network administrator for details, then select the
appropriate printer name.
The AppleTalk zone setting is incorrect (for Mac OS X 10.4
or below).
Open the Printer Setup Utility, then select the AppleTalk zone
that the printer is connected to.
EPSON AcuLaser C9200 Series User's Guide
Troubleshooting 211
Downloaded from ManualsPrinter.com Manuals
Page view 210
1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 270 271

Comments to this Manuals

No comments