Epson Stylus Color 900 Ink Jet Printer User Manual download pdf (Page 26)

2-2

Printing with EPSON Stylus RIP for Macintosh

Setting Up the EPSON Stylus RIP

Server

Follow the steps below to set up the EPSON Stylus RIP Server

software the first time you use it youll need to do this for

both standalone and network configurations.

1. Make sure the Stylus RIP Server application has at least

20MB of RAM available. Open the

Stylus RIP

folder on

your hard disk, and highlight the

Stylus RIP Server

icon.

Choose

Get Info

from the File menu, then set the

following Memory Requirements:

◗ Preferred Size 20000K

◗

Minimum Size 16000K

Note:

If you are not running your Macintosh with virtual memory

turned on, increase each of the Memory Requirements by

4000K.

2. Disable all desktop printing extensions.

3. Turn on the printer and wait to make sure its power light

comes on and the light is not flashing. Make sure the

printer is properly connected to your Macintosh or

network.

4. Start the Stylus RIP Server application by

double-clicking the

Stylus RIP Server

icon.

5. The first time you run the server software, a dialog box asks

you to select your port or your printer name. Select the

appropriate modem, printer, or USB port (SC900/SP1200

only) if you are connected to the printer via a serial or USB

cable.

Nflight.bk Page 2 Thursday, April 22, 1999 5:02 PM

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 78 79

No comments

Epson Stylus Color 900 Ink Jet Printer User Manual Page 26