Epson AcuLaser C9300 User Manual download pdf (Page 108)

3. Press the d Down or u Up button to select Cancel Job, then press the OK button. Printing is

canceled.

Note:

❏ Select Cancel All Jobs on step 3 to cancel all print jobs in the printer’s memory.

❏ The operation is canceled and printing restarts one minute after the printer is not operated.

❏ After canceling jobs is completed, the printer recovers from pause.

Using the Reset menu

Selecting Reset from the control panel’s Reset Menu stops printing, clears the print job being

received from the active interface, and clears errors that may have occurred at the interface.

Follow the steps below to use the Reset Menu.

1. Press the r Right button to access the control panel menus.

2. Press the d Down button several times until Reset Menu appears on the LCD panel, then press

the r Right button.

3. Press the d Down button several times until Reset to display.

4. Press the r Right button. Printing is canceled. The printer is ready to receive a new print job.

Interrupting Printing

If the printer is shared, it is possible to interrupt the current print job to print a different print job.

Follow the steps below to use this function.

1. Press the W Pause/Cancel button to stop the current print job.

2. Press the d Down or u Up button to select the job that you want to print, then press the OK

button.

3. Press the d Down or u Up button to select Interrupt Printing, then press the OK button.

Epson AcuLaser C9300 Series User's Guide

Using the Control Panel 108

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 209 210

No comments

Epson AcuLaser C9300 User Manual Page 108