Epson 5600p User Manual download pdf (Page 21)

Setting Up the Projector

Connecting to Video Sources

You can connect a DVD player, VCR, camcorder, laser disc player,

digital camera, or any other compatible video source to your projector.

The projector supports HDTV, NTSC, PAL, and SECAM, and

automatically detects the video format. (However, if you’re using a

60-hertz PAL system, you’ll need to select

PAL60

in the Video menu,

as described on page 47.)

The projector can receive composite video, S-Video, and component

video. You can connect one or more of these video sources at the same

time. However, these sources share the same audio input port, so you

can connect audio for only one of the sources (see page 19).

The type of cable you use depends on whether you have composite

video, S-Video, or component video.

■

For composite video, use the RCA video cable included with the

projector.

■

For S-Video, use the S-Video cable supplied with your video

device or obtain one from your electronics dealer.

■

For component video, you’ll need a VGA-to-3BNC cable. You

can purchase this from EPSON; see page 8.

See the following illustration if you’re not sure which type of

connectors you have.

Follow the instructions below for your type of connection.

note

The projector does not

support TV antenna cable

F-connectors.

S-Video

4-pin, mini-DIN

component video

BNC connector

composite video

RCA connector

5600 and 7600.book Page 15 Thursday, December 14, 2000 2:46 PM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 113 114

No comments

Epson 5600p User Manual Page 21