Epson 5600p User Manual download pdf (Page 73)

Solving Problems

What To Do When the Lights Flash

The lights on top of the projector indicate the projector’s status and

let you know when a problem occurs.

If the projector is not working correctly, first turn it off and unplug it.

Then plug the power cord back in and turn on the projector. If this

does not solve the problem, check the status lights on top of the

projector and try the solutions recommended below.

Computer

A/V mute

Resize

Power

power light

lamp light

temperature light

Light Status Description

does not come on Make sure the power cord is securely connected both at the power

outlet and the projector.

green The projector is operating normally.

flashing green The projector is warming up. Wait for the image to appear.

orange The projector is in sleep mode. You can unplug it to turn it off or press

the Power button to turn it on.

flashing orange The lamp is cooling down. Don’t unplug the projector until the light

stops flashing and remains orange. If you want to turn the projector

back on, wait until the light stops flashing and press the Power

button.

flashing red Power is cut off because of an internal problem. Remove the power

cord and contact EPSON for help; see page 75.

flashing orange The lamp is almost burned out. This is a good time to replace it. See

page 60 for instructions.

flashing red The lamp is burned out. Replace it as described on page 60. If you

have just replaced the lamp, make sure its cover is fastened securely.

5600 and 7600.book Page 67 Thursday, December 14, 2000 2:46 PM

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 113 114

No comments

Epson 5600p User Manual Page 73