Epson 5600p User Manual download pdf (Page 84)

Connecting to Additional Equipment

Installing the Projector

The projector can be installed for three different viewing setups: front

projection, ceiling mounting, or rear projection onto a

semi-transparent screen, as shown:

To project from overhead, you’ll need to select

Ceiling

in the

projector’s Advanced menu. To project from the rear, select

Rear

Proj

. See “Setting Advanced Features” on page 54.

If you’re ceiling-mounting the projector and you place it above screen

level, you’ll have to tilt it down to position the image on-screen. This

causes the image to lose its square shape. You can then correct the

distortion by using the

Keystone

function in the projector’s menu

system (see “Customizing Projector Features” on page 53) or by using

the

Keystone

button on the projector’s control panel.

If you place the projector’s lens so it’s level with the top of the screen,

the image will be square and you won’t have to adjust it. If you place

the lens lower than the top of the screen, you’ll have to tilt the

projector upward if you want to fill the whole screen with the image.

Controlling the Projector from a Computer

If you want to be able to control the projector’s settings from a

computer, you can install the EMP Link V program on the Projector

Software CD-ROM. You’ll also need a serial cable to connect the

projector to the computer.

front projection ceiling mounting rear projection

note

See “Positioning the

Projector” on page 10 for

more information.

5600 and 7600.book Page 78 Thursday, December 14, 2000 2:46 PM

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 113 114

No comments

Epson 5600p User Manual Page 84