EPSON EPL-N1600 Chapter 3 Troubleshooting
Rev. A 74
1.8 ERROR MESSAGE “INSERT IMAGING CRTG”
Check if this error messa
e is displayed even if the ima
in
cartrid
e is
already installed in the printer.
Step Actions and Questions Yes No
SUSPECT COMPONENTS
The followin
components are
associated with this specific problem.
One or more of these components ma
have failed partiall
or completel
. If
ou
cannot isolate the problem usin
this
FIP, replace each component listed
below, one at a time, until the problem
disappears.
• PWBA Hotaru
• C258MAIN Board
1 Remove and reinstall the ima
in
Cartrid
e.
Does this error messa
e still appear?
Go to step 2. Problem
solved.
2 Reseat the HPS to make sure that the
conductor strips for appl
in
the
volta
es of the HPS to the BCR,
Ma
net Roll, and BTR are in complete
contact with the correspondin
conductors on the HPS.
Does this error messa
e still appear?
Go to step 3. Problem
solved.
3 PWBA HOTARU (PL7.2.4)
1. Remove the PWBA Hotaru.
2. Check for the continuit
between:
P21-A9 andP31-A5
P21-A10 and P31-A4
P21-A11 and P31-A3
P21-B7 and P31-B7
P21-B8 and P31-B6
P21-B9 and P31-B5
P21-B10 and P31-B4
P21-B11 and P31-B3
P21-B13 and P31-B1
Is there continuit
between P21 and
P31?
Go to step 4. Replace PWBA
Hotaru.
4
C258MAIN Board
Replace the C258MAIN Board.
Does this error messa
e still appear?
Replace the
HPS.
Problem
solved.
Step Actions and Questions Yes No
Comments to this Manuals