Epson Ensemble HD 1080 Projector User's Guide download pdf (Page 4)

Additional Safety Instructions

• Do not place the components of this system near sources of heat or in direct sunlight.

• Make sure nothing blocks the ventilation openings on any of the components. Allow for sufficient heat

dispersion when components are installed on a rack. Do not block or cover the heatsink on the back of the

subwoofer.

• Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

• When unplugging the power cord of any system component, handle it carefully. Hold the plug when

unplugging the cord.

• This product should be operated only from the type of power source indicated on the marking label. If you

are not sure of the type of power supplied in your home, consult your product dealer or local power

company.

• Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk

of fire or electric shock.

• Keep the system components free from moisture, water, and dust.

• Do not let insecticides, benzene, or thinner come in contact with any components of the system.

• Never push objects of any kind through openings in the system components as they may touch dangerous

voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind

on the product.

• Except as specifically explained in these instructions, do not attempt to service this product yourself. Refer

all servicing to qualified service personnel.

• Never disassemble or modify the product in any way. Dangerous electrical voltages inside the components

can severely injure you.

• When replacement parts are required, be sure the service technician has used replacement parts specified by

the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may

result in fire, electric shock, or other hazards.

• When closing the screen, be careful not to pinch your fingers where the screen closes against the case.

• Do not touch the white part of the screen with your hands. Oil from your skin could damage it.

• Never look into the projector lens when the lamp is turned on. The bright light can damage your eyes.

Never let children look into the lens when it is on.

• Don’t use the projector outside of the required temperature range of 41 to 95 °F (5 to 35 °C). Doing so

may cause an unstable display and could lead to projector damage.

• The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding

disposal or recycling. Do not put in the trash.

• Allow the projector lamp to cool for one hour before replacing it.

1 2 3 4 5 6 7 8 9 ... 131 132

No comments

Epson Ensemble HD 1080 Projector User's Guide Page 4