Epson C11C560031BS Datasheet download pdf (Page 32)

Chapter3 PaperHandling 32

3. Press the Offline button while the F1/Eject, Offline,andF2

lights are flashing.

4. When the Ready light turns on, insert a sheet of A4 paper into

the front slot. The printer prints triple H in capitals (HHH) on

the current top-of-form position and ejects the sheet.

5. Press the F1/Eject button to move the top-of-form position

up on the page, or press the F2 button to move the top-of-form

position down on the page. Each time you press the F1/Eject

or F2 button, the printer makes a short beep. Pressing these

buttons executes micro feed in 0.282 mm (1/90-inch)

increments.

Note:

The top-of-form position can be set from 1.0 mm to 33.8 mm in the

PR2 mode and from 1.0 mm to 33.9 mm in the ESC/P and IBM

PPDS modes.

6. Insert a sheet of A4 paper into the front slot. The printer prints

triple H in capitals (HHH) on the current top-of-form position

and ejects the sheet. You may continue to adjust the position

by pressing the F1/Eject and F2 buttons and checking the

position by inserting another sheet.

7. After finishing the adjustment, turn off the printer. The setting

does not change even if the printer is turned off.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 175 176

No comments

Epson C11C560031BS Datasheet Page 32