Epson LQ-670 Troubleshooting Guide download pdf (Page 17)

EPSON LQ-670

3/97

EPSON LQ-0670 - 17

Using Postcards

You can print on a variety of postcards, loading them in the

same way as you load single sheets: from the paper guide or

with the optional cut-sheet feeder.

Before printing, set the paper thickness lever to “2.” Then

select Card mode by pressing the Tear Off/Bin button until

both Tear Off/Bin lights are on.

Load postcards printable side up. Make sure that the right

edge guide is aligned with the arrow on the paper guide, and

position the left edge guide to match the width of your

postcard.

Caution:

Card mode is available only when the paper thickness

lever is set to “2” or higher on the scale.

When printing on postcards, make sure that your

software settings keep the printing entirely within the

printable area. Printing on the edge of a postcard can

damage the print head.

Use postcards only under normal operating conditions.

Switching Between Continuous Paper and

Single Sheets

When using the tractor, you can easily switch between

continuous paper and single sheets (including envelopes or

postcards) without removing the continuous paper from the

tractor.

Switching to single sheets

To switch from continuous paper to single sheets, follow the

steps below.

1. When you have finished printing on continuous paper, press

the Tear Off/Bin button to advance the paper to the tear-off

position. (If you selected auto tear-off in the printer’s

default-setting mode or the EPSON Remote! utility, the

printer advances the paper perforation to the tear-off

position automatically.)

2. Tear off the printed pages.

Caution:

Always tear off paper before feeding it backwards;

feeding too many sheets backwards can cause a

paper jam.

Never feed labels backward with the Load/Eject or

Tear Off/Bin buttons. Labels can easily peel off their

backing and jam the printer.

3. Press the Load/Eject button to feed the continuous paper

back to the standby position. The paper is still attached to

the tractor, but no longer in the paper path.

4. Move the paper release lever back to the single-sheet

position.

Now you can load single sheets from the paper guide.

Switching to continuous paper

To switch from single sheets to continuous paper, follow the

steps below.

1. If necessary, press the Load/Eject button to eject the last

printed single sheet.

2. Make sure continuous paper is loaded in the printer.

3. Move the paper release lever forward to the tractor position.

The printer automatically advances the continuous paper from

the standby position to the loading position when it receives

data.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments

Epson LQ-670 Troubleshooting Guide Page 17

Comments to this Manuals

Related products and manuals for Dot matrix printers Epson LQ-670