Epson LX-1170 User Manual download pdf (Page 65)

Using the Printer

2-25

Using the Tear Off button

After the printer finishes printing your document, check that the

Tear Off (Font) lights are not flashing. Then press the Tear Off

(Font) button. The printer advances the paper to the tear-off edge.

Note:

If the Tear Off (Font) lights are flashing, the paper is in the tear-off

position. If you press the Tear Off (Font) button again, the printer feeds

your paper to the next top-of-form position.

Advancing the paper to the tear-off position automatically

To automatically advance your printed documents to the tear-off

position, you need to turn on the auto tear-off mode and select

the appropriate page length for continuous paper in the Default

Setting mode. For instructions, see “Changing default settings”

on page 2-9.

When auto tear-off is on, the printer automatically advances the

paper to the tear-off position whenever it receives a full page of

data or a form feed command followed by no more data.

Adjusting the tear-off position

If your paper’s perforation is not aligned with the tear-off edge,

you can use the Micro Adjust feature to move the perforation to

the tear-off position.

Follow these steps to adjust the tear-off position:

Caution:

Never use the paper-feed knob to adjust the tear-off position; this

may damage the printer or cause it to lose the tear-off position.

Note:

Your tear-off position setting remains in effect until you change it, even

if you turn off the printer.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 153 154

No comments

Epson LX-1170 User Manual Page 65