Epson LX-1170 User Manual download pdf (Page 28)

1-12

Setting Up the Printer

8. For LX-1170 users, reinstall the paper tension unit.

9. Reinstall and close the printer cover.

When printing becomes faint, you need to replace the ribbon

cartridge. To remove the old ribbon cartridge, first make sure the

print head is in position at 10 cm (4 inches) from the left side. Then

remove the cartridge by lifting the both ends and taking it out of

the printer.

Running the Self Test

Use the built-in self test function to check that the printer is

working properly. You can run the test with either continuous

paper or single sheets. The procedure below describes the test

using single sheets, which is the easier way.

Follow these steps to run the self test:

1. Make sure the printer is turned off. Also make sure that the

paper-release lever is pushed back to the single-sheet position

and the paper guide is in the upright position, as shown

below.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 153 154

No comments

Epson LX-1170 User Manual Page 28