Epson LX-1170 User Manual download pdf (Page 34)

1-18

Setting Up the Printer

Note:

If there is a ground wire at the end of the cable, attach it to the ground

connector located to the right of the serial interface port.

3. Plug the other end of the cable into the computer’s serial

interface port and then tighten the screws on both sides of the

connector. (If there is a ground wire at the end of the cable,

attach it to the ground connector at the back of the computer.)

4. Use the Default Setting mode to change the baud rate or parity

bit, if necessary. See “About Your Printer’s Default Settings”

on page 2-3.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 153 154

No comments

Epson LX-1170 User Manual Page 34