Epson LX-1170 User Manual download pdf (Page 79)

Using the Printer

2-39

4. Load continuous paper on the sprocket units of the

push-tractor. (See “Printing on Continuous Paper” on page

2-10.)

5. Turn on the printer. Hold down the LF/FF button to feed paper

in one page.

6. Release the sprocket lock levers of the pull tractor and adjust

the sprocket units to match the width of the paper. Be sure

that the sprocket units on both tractors are aligned so that the

paper is not crooked.

7. Open the sprocket covers. Fit the holes of the paper over the

tractor pins of the sprocket units and adjust the sprocket units

as necessary. (See “Printing on Continuous Paper” on page

2-10.) Close the sprocket covers.

8. If there is slack in the paper between the push and pull

tractors, push in and turn the paper-feed knob on the right

side of the pull tractor to remove the slack.

9. See that the paper is not crooked or wrinkled and lock the

sprocket units in place.

10. Re-install the printer cover and the paper guide.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 153 154

No comments

Epson LX-1170 User Manual Page 79