Epson TM-T70 Instruction Manual download pdf (Page 31)

Rev. A Setup 2-9

TM-T70 Technical Reference Guide

2.3.1.3 Connecting the serial interface (RS-232) cable

WARNING:

Be sure to turn off the power supply for both the printer and host computer before

connecting the cables.

1. Insert the interface cable connector firmly into the interface connector on the connector

panel.

2. When using connectors equipped with screws, tighten them to secure the connectors firmly.

3. When using interface cables equipped with a ground line, attach the ground line to the

screw hole marked “FG” on the printer.

4. Connect the other end of the interface cable to the host computer.

Figure 2-15 Printer connectors

2.3.2 Parallel Interface Connection

The parallel interface model TM printer is connected to the host computer via the parallel port.

When a customer display (DM-D) is to be connected, connect the TM printer to the host

computer via the serial port.

24V

FG FG

Interface connector

Drawer kick-out connector

Power supply connector

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 83 84

No comments

Epson TM-T70 Instruction Manual Page 31