Epson 2000P User Manual download pdf (Page 53)

P is on The

Ppower light is on when the printer is ready to print. It flashes

when the printer is receiving a print job, charging ink, or cleaning the

print head.

flashes When the

S paper out light flashes, you have a paper jam. Press the

E load/eject button to try to clear the jam. If that doesn’t work, turn off

the printer and gently pull out all the paper. Make sure none of the

sheets are curled, creased, old, stuck together, or too thin. Then reload

the paper against the right edge guide and slide the left edge guide

against it. Turn on the printer and press the

E load/eject button to

resume printing. (If you’re using roll paper, see page 28 for additional

loading instructions.)

is on When the

S paper out light comes on, your paper is out or incorrectly

loaded. Make sure none of the sheets are curled, creased, old, stuck

together, or too thin. Then reload the paper against the right edge

guide and slide the left edge guide against it. Press the

E load/eject

button to resume printing. (If you’re using roll paper, see page 28 for

additional loading instructions.)

flash When an ink out light flashes, your ink supply is low. Make sure you

have a replacement cartridge.

are on When an ink out light comes on, you need to replace the ink cartridge.

Make sure you have a replacement cartridge. See page 40 for

replacement instructions. If an ink out light comes on after you’ve

replaced a cartridge, you installed a cartridge your printer can’t use.

Remove it and replace it with the correct type.

P and

flash

and

are on

When the

Ppower and

S paper out lights flash, and both of the ink out

lights come on, jammed paper may be blocking movement of the print

head. Turn off the printer, open the cover, and check inside for any

jammed paper. Then turn the printer back on. If the lights still flash and

come on, contact your dealer or EPSON; see page 59 for information.

flash When all the lights flash, your printer may have an internal error. Make

sure you removed all the packing material as described on the Start

Here poster in your printer box. Then turn off the printer, wait a few

seconds, and turn it on again. If the lights still flash, contact your dealer

or EPSON; see page 59 for contact information.

are off When all the lights are off, the printer is not receiving power. Try these

solutions:

■ Make sure the printer is turned on.

■ Turn off the printer, plug in the power cord securely, and turn on

the printer again.

■ Make sure the outlet is operable and is not controlled by a switch

or timer. If in doubt, try using another outlet.

Pbasics.book Page 48 Wednesday, November 29, 2000 5:46 AM

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 76 77

Comments to this Manuals

No comments

Epson 2000P User Manual Page 53

Comments to this Manuals

Related products and manuals for Print & Scan Epson 2000P